• Moscow +7 (499) 748-02-29
  • Tikhoretsk +7 (86196) 7-15-16

Railway Vehicles

Catenary maintenance vehicle ADMckm mk.2

Specifications

General
power unit output, kW (hps) 220(300)
engine type diesel, YaMZ-238 B-33
gear-box type hydro-mechanical, GP-300
own deck cargo capacity, t 5
maximum speed, km/h 100
crawling speed max., km/h 5
max. towing capacity at shunting mode, t 400
passenger capacity, pers. 9
proper weight, t 32
Crane
type of crane articulated jib
load lifting capacity at min. outreach, outriggers deployed, t 7
load lifting capacity at max. outreach, outriggers deployed, t 1,63
load hook lifting height, meters from rail top level 15,56
max. load hook outreach, meters from track centre 11,7
min. load hook outreach, meters from track centre 3
detachable basket availible
load lifting capacity of the basket, t 0,4
lifting height of the basket floor over rail top, m 16,1
basket outreach, meters from track centre 13,76
Lifting platform
make TMCP
load lifting capacity, t 0,5
lifting platform floor lifting height, meters from rail top 6,55
outreach, meters from track centre 3,53
Overall dimensions of the vehicle
length between couplers axis, mm 13170
width, mm 3320
height, mm 4850
wheel base, mm 7000

The vehicle was designed to carry out the following operations:

  • scheduled maintenance and emergency recovery operations;
  • Transportation of loads on coupled wagons;

  • Delivery of workers to site;

  • Shunting at station yards;

  • Power supply to welding equipment at work site;

  • Power supply to electrical equipment working at 380/220V, 50Hz.;

ADMckm mk.2 catenary maintenance vehicle is fully self-propelled. The control cabin is mounted on the front part of the vehicle frame, the articulated crane - on ther rear part. The crane serves to perform catenary masts deinstallation and installation operations and to handle cargoes. The liftting platform is situated on top of the control cabin. The power pack is hidden under the frame in the middle section of the vehicle. Torque is transmitted from diesel engine to hydraulic gearbox input shaft and having passed through torque converter and gears is passed to 3-phase alternator, slow speed drive motor and to cardan shafts connected with axle gearboxes of wheel sets. The air compressor is driven through belt drive.

Similar vehicles

Contact

  • TMCP V.V. Vorovsky, JSC

    Krasnoarmeyskaya St., 67, Tikhoretsk, Krasnodar territory, Russia, 352127
    Ph.: +7 (86196) 7-15-16;
    Fax: +7 (86196) 7-15-26
    info.tih@tmzv.ru

    Technical Service Hot Line: +7 800 250-38-87

    Map view
  • Putevie Mashini, Managing Company

    3rd Sokolnitcheskaya St., 5/1, Moscow, Russia, 107014
    Ph.: +7 (499) 268-53-04
    Fax: +7 (499) 748-02-29
    info@tmzv.ru

    Map view

Feedback Form